Ambit Microsystems Router Login - Default Settings and Admin Access

Ambit Microsystems is a Taiwanese ODM that produces cable modems, broadband gateways, set-top boxes, and networking equipment primarily for ISPs and major brands. Acquired by Foxconn in 2004, Ambit-designed products are widely deployed by cable operators such as Comcast, Rogers, and others under various OEM brands.

Common IP Addresses for Ambit Microsystems Routers

IP Address Probability Action
192.168.1.1 70% Login →
192.168.0.1 50% Login →
192.168.100.1 10% Login →
10.0.0.1 10% Login →

Default Login Credentials for Ambit Microsystems Routers

UserName Password Probability
admin admin 45%
admin password 25%
user user 20%
admin - 10%

How to Login to Ambit Microsystems Router

Follow these steps to access your Ambit Microsystems router admin panel:

  1. Connect your computer or device to your router via WiFi or Ethernet cable.
  2. Open a web browser and type your Ambit Microsystems router's IP address (192.168.1.1) in the address bar.
  3. Enter the username and password. Try the default credentials listed above if you haven't changed them.
  4. Click Login to access the admin dashboard where you can configure your network settings.

Troubleshooting Ambit Microsystems Router Login Issues

If you're having trouble accessing your Ambit Microsystems router, try these solutions:

  • Make sure you're connected to the router's network (not mobile data).
  • Try using http:// instead of https:// before the IP address.
  • Clear your browser cache or try an incognito/private window.
  • Check the label on your Ambit Microsystems router for the correct default IP address.
  • If you forgot your password, you may need to factory reset the router.

Frequently Asked Questions - Ambit Microsystems Router

What is the default IP address for Ambit Microsystems routers?

Ambit Microsystems routers commonly use the following default IP addresses: 192.168.1.1, 192.168.0.1, 192.168.100.1, 10.0.0.1. You can find the exact IP on your router's label.

What is the default username and password for Ambit Microsystems router?

Most Ambit Microsystems routers use "admin" as both the username and password by default. However, some models may use "admin" for username and "password" or blank for the password. Check your router's manual or label for exact credentials.

How do I reset my Ambit Microsystems router to factory settings?

To reset your Ambit Microsystems router, locate the small Reset button (usually on the back), press and hold it for 10-15 seconds using a paperclip, then release. Wait for the router to reboot. This will restore all default settings including the password.

Other Router Brands

Arris ASUS Belkin Cisco D-Link Eero Google Huawei

Useful Networking Tools

Check out our free tools to help with your network setup

Router IP List What is My IP Subnet Calculator