Allied Telesyn Router Login - Default Settings and Admin Access

Allied Telesyn is the former name of Allied Telesis, a Japanese networking equipment manufacturer. The company was rebranded as Allied Telesis in 2005, but many legacy devices including the AT-AR series of access routers, AT-FS Ethernet switches, and AT-RG residential gateways still carry the original Allied Telesyn branding and remain in service in enterprise and education networks.

Common IP Addresses for Allied Telesyn Routers

IP Address Probability Action
192.168.1.1 70% Login →
192.168.0.1 50% Login →
192.168.10.1 10% Login →
10.0.0.1 10% Login →

Default Login Credentials for Allied Telesyn Routers

UserName Password Probability
manager friend 50%
admin admin 25%
admin password 15%
root root 10%

How to Login to Allied Telesyn Router

Follow these steps to access your Allied Telesyn router admin panel:

  1. Connect your computer or device to your router via WiFi or Ethernet cable.
  2. Open a web browser and type your Allied Telesyn router's IP address (192.168.1.1) in the address bar.
  3. Enter the username and password. Try the default credentials listed above if you haven't changed them.
  4. Click Login to access the admin dashboard where you can configure your network settings.

Troubleshooting Allied Telesyn Router Login Issues

If you're having trouble accessing your Allied Telesyn router, try these solutions:

  • Make sure you're connected to the router's network (not mobile data).
  • Try using http:// instead of https:// before the IP address.
  • Clear your browser cache or try an incognito/private window.
  • Check the label on your Allied Telesyn router for the correct default IP address.
  • If you forgot your password, you may need to factory reset the router.

Frequently Asked Questions - Allied Telesyn Router

What is the default IP address for Allied Telesyn routers?

Allied Telesyn routers commonly use the following default IP addresses: 192.168.1.1, 192.168.0.1, 192.168.10.1, 10.0.0.1. You can find the exact IP on your router's label.

What is the default username and password for Allied Telesyn router?

Most Allied Telesyn routers use "admin" as both the username and password by default. However, some models may use "admin" for username and "password" or blank for the password. Check your router's manual or label for exact credentials.

How do I reset my Allied Telesyn router to factory settings?

To reset your Allied Telesyn router, locate the small Reset button (usually on the back), press and hold it for 10-15 seconds using a paperclip, then release. Wait for the router to reboot. This will restore all default settings including the password.

Other Router Brands

Arris ASUS Belkin Cisco D-Link Eero Google Huawei

Useful Networking Tools

Check out our free tools to help with your network setup

Router IP List What is My IP Subnet Calculator