Alcatel-Lucent Router Login - Default Settings and Admin Access

Alcatel-Lucent was a major French-American telecommunications equipment company that produced carrier-grade IP/MPLS routers, optical transport systems, fixed and mobile broadband network equipment, and enterprise networking gear under the OmniSwitch and OmniAccess brands. Alcatel-Lucent was acquired by Nokia in 2016, but its product lines (including the 7750 SR and OmniSwitch series) remain widely deployed by ISPs and enterprises worldwide.

Common IP Addresses for Alcatel-Lucent Routers

IP Address Probability Action
192.168.10.1 30% Login →
192.168.1.1 60% Login →
192.168.0.1 40% Login →
10.0.0.1 10% Login →

Default Login Credentials for Alcatel-Lucent Routers

UserName Password Probability
admin switch 35%
admin admin 30%
admin password 20%
root admin 15%

How to Login to Alcatel-Lucent Router

Follow these steps to access your Alcatel-Lucent router admin panel:

  1. Connect your computer or device to your router via WiFi or Ethernet cable.
  2. Open a web browser and type your Alcatel-Lucent router's IP address (192.168.10.1) in the address bar.
  3. Enter the username and password. Try the default credentials listed above if you haven't changed them.
  4. Click Login to access the admin dashboard where you can configure your network settings.

Troubleshooting Alcatel-Lucent Router Login Issues

If you're having trouble accessing your Alcatel-Lucent router, try these solutions:

  • Make sure you're connected to the router's network (not mobile data).
  • Try using http:// instead of https:// before the IP address.
  • Clear your browser cache or try an incognito/private window.
  • Check the label on your Alcatel-Lucent router for the correct default IP address.
  • If you forgot your password, you may need to factory reset the router.

Frequently Asked Questions - Alcatel-Lucent Router

What is the default IP address for Alcatel-Lucent routers?

Alcatel-Lucent routers commonly use the following default IP addresses: 192.168.10.1, 192.168.1.1, 192.168.0.1, 10.0.0.1. You can find the exact IP on your router's label.

What is the default username and password for Alcatel-Lucent router?

Most Alcatel-Lucent routers use "admin" as both the username and password by default. However, some models may use "admin" for username and "password" or blank for the password. Check your router's manual or label for exact credentials.

How do I reset my Alcatel-Lucent router to factory settings?

To reset your Alcatel-Lucent router, locate the small Reset button (usually on the back), press and hold it for 10-15 seconds using a paperclip, then release. Wait for the router to reboot. This will restore all default settings including the password.

Other Router Brands

Arris ASUS Belkin Cisco D-Link Eero Google Huawei

Useful Networking Tools

Check out our free tools to help with your network setup

Router IP List What is My IP Subnet Calculator