Aerohive Router Login - Default Settings and Admin Access
Common IP Addresses for Aerohive Routers
Default Login Credentials for Aerohive Routers
How to Login to Aerohive Router
Follow these steps to access your Aerohive router admin panel:
- Connect your computer or device to your router via WiFi or Ethernet cable.
- Open a web browser and type your Aerohive router's IP address (192.168.1.1) in the address bar.
- Enter the username and password. Try the default credentials listed above if you haven't changed them.
- Click Login to access the admin dashboard where you can configure your network settings.
Troubleshooting Aerohive Router Login Issues
If you're having trouble accessing your Aerohive router, try these solutions:
- Make sure you're connected to the router's network (not mobile data).
- Try using http:// instead of https:// before the IP address.
- Clear your browser cache or try an incognito/private window.
- Check the label on your Aerohive router for the correct default IP address.
- If you forgot your password, you may need to factory reset the router.
Frequently Asked Questions - Aerohive Router
What is the default IP address for Aerohive routers?
Aerohive routers commonly use the following default IP addresses: 192.168.1.1, 192.168.0.1, 192.168.2.1. You can find the exact IP on your router's label.
What is the default username and password for Aerohive router?
Most Aerohive routers use "admin" as both the username and password by default. However, some models may use "admin" for username and "password" or blank for the password. Check your router's manual or label for exact credentials.
How do I reset my Aerohive router to factory settings?
To reset your Aerohive router, locate the small Reset button (usually on the back), press and hold it for 10-15 seconds using a paperclip, then release. Wait for the router to reboot. This will restore all default settings including the password.
Other Router Brands
Useful Networking Tools
Check out our free tools to help with your network setup